Luthiers Lot 5 Stratocaster and Telecaster Style Replacement Necks. 21 and 22 fret necks! All neck contours are "C" shaped profiles. 1- Complete set of leveled frets 2-Handcut installed string-nut. 5-pre-drilled tuner and string tree holes.
Two of the necks have a Telecaster style heel for easy placement into a Telecaster body pocket As well-one of the Tele style necks includes a new set of chrome tuners! Two of the Stratocaster style necks have 22 frets! The fret board woods include. Three Rosewood and Two Maple fretboards. All are maple shaft necks with either: Rosewood or Maple fingerboards.
All are 25.5 scale. 1-11/16" nut, and 12" fingerboard radius. All have no wear on the frets.
All have working truss rods. The heels measure 2-1/4 at the widest point.
Two have 22 frets and three have 21 frets. One Maple neck has a new set of chrome tuners installed. The nut slots all cut. All finished in Satin lacquer. The necks are in very good condition with installed nuts and holes drilled for tuners.
All have generic style headstocks which can be re-cut and styled as desired. Necks came from parts lot. They are all good candidates to be used for any Strat or Tele projects. We'll Shave Your Existing neck to a More Comfortable Profile So You Have A Better Feel.
Both Acoustic and Electric Guitar Neck Shaving and Profiling. What we'll do for your guitar neck. We'll shave your guitar neck to help you become more comfortable with your guitar and as well, you'll play better. We then apply a finish simply to prevent moisture from absorption into the neck wood. If you are a guitar collector, neck shaving may or may not improve the resale value of your instrument.
More often than not, anything that you do to an original instrument will take value away. Many guitar buyers however love all the flaws and patina of an old guitar. Therefore, we recommend shaving only the guitar necks used in your work, your gigs, your recording sessions and concerts. Need a better and more comfortable playing feel on your neck?Guitar Neck shaving in the Haywire Custom Guitars-Custom Shop for max hand comfort is for You! Thank you for stopping by and taking time to inquire about Guitar Neck Shaving for your acoustic and electric guitar necks! Guitar neck shaving, thinning or reshaping a guitar neck, re-profiling a guitar neck or shaping and duplicating guitar necks? We do it all as a result, you feel more comfortable with your guitar.
Therefore, when you have an electric or acoustic guitar neck that you just love but it's a bit too thick, we'll shave it for you. How To Communicate the Neck Shaved Profile Outcome You'd Like? The best way to communicate what you need is to either work with specs from your existing neck or send a neck along with the one you'd like shaved.Ideally the sample neck you send should be what you'd liked duplicated on the neck to be shaved. NOTE: We can duplicate any neck profile for you. If you want to us to work from an existing neck, then move the strings off of the fret board and take thickness measurements with a digital caliper in between the frets on the wood.
We do this every time a neck comes into the shop. Take the sample thicknesses from-1st fret 3rd 5th 7th 9th 12fth frets.
From those measurements we'll be able to determine how much you need removed to make it a better playing neck for you. Similarly, we use those thickness numbers to work from. Here is a typical example of the info we share with you when we get your neck in the shop to be shaved. The specs as it came in were as follows. 1st fret 3rd 5th 7th 9th 12th.
After a guitar neck shaving here are the new specs as follows. In the same way, we can get the reduction as close as possible within a few thousandths of what you need removed. There are other ways to communicate your desired result, such as simply: "I'd like a 20% reduction" and we can do that.The more specific you can be with your request, then the better the outcome will be. We can duplicate anything you send us as well. The other consideration is the back profile and if you'd like it to stay the same or if you want a change. Thanks for dropping by the Haywire Custom Shop Store!