Saramonic Smartrig Audio Interface Preamplifier for XLR Microphone 6.3Mm Guitar

  

Saramonic Smartrig Audio Interface Preamplifier for XLR Microphone 6.3Mm Guitar Smartphone Iphone Youtube Recording Streaming. SmartRig II- 3.5mm TRRS connector. The Saramonic SmartRig II is an easy solution to connect any a XLR microphone or 6.3mm guitar to your iPhone, iPod touch, or iPad and Android devices. As a high-quality microphone preamp, the Saramonic SmartRig II allows you to use professional stage microphones or high-end studio microphones to create music with your mobile iOS or Android devices.

Important note: To use the headphone monitoring jack, the recording app you use must feature a "playback monitoring" option. What that does is sends a playback signal in addition to receiving the audio input. If your microphone needs phantom power, please slide the power switch to the +48V position. The red and green LEDs will light at the same time.

Combo 1/4' (6.35mm) and XLR input Power/Phantom power provided by 9V battery +48V phantom power 3.5mm headphone output for monitoring(need APP) +48V/OFF/ON switch Gain control. Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB Dimensions: -98 dB full band phantom power ON Maximum output level:2 Vrms Distortion:0.025% THD Phantom max current:13mA Dimensions:L 88 W 41 H 42 mm Weight:75g 2.57 oz.

SmartRig+ 3.5mm TRRS connector. The Saramonic SmartRig+ is a portable microphone/guitar interface for recording professional quality audio.

The SmartRig+ makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels allow you to connect and control gain on multiple microphones or guitars at the same time.

The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4' (6.35mm) guitar inputs, and two 1/8' (3.5mm) jack inputs for connecting any instrument or microphone. Outputs to a standard 1.8' 3.5mm cable for use with, smartphones, cameras and other devices. Provides 48V phantom power for microphones, and includes a 3.5mm headphone output for real-time sound monitoring. The two gain control thumbwheels make it easy to set precise levels. Toggle between Mono and Stereo output modes as necessary. Powered by one 9V battery. Two Independent Channels Two XLR Microphone Inputs Two 3.5mm (TRS) Microphone Inputs Two 1/4' Guitar Inputs Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS) 3.5mm Headphone Output Jack for Monitoring +48v Phantom Power Switch Mono/Stereo Toggle Output Switch.

20 Hz to 20 Khz, +/- 0.5 dB. 1 9V Alkaline or Lithium. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.